GSK 218M, Connection And Plc Manual

Page: 27 / 227

GSK218M CNC System Connection and PLC Manual
24
interface of XS 43, XS44 and XS45.
The signal specification of X addresses can be customed by customer according to the actual
operation. X addresses are used to connect the machine tool with the ladder. For the initial
definition of input address, see Connection.
3.1.2 Assignment of MDI panel X address
The addresses are from X20 to X30, 11bytes. They correspond to the press keys on MDI panel,
and their signal definitions cannot be changed by user.
Addresses and press keys are as follows:
Input key on operator panel PLC address
Edit mode
X20.0
Auto mode X20.1
MDI mode X20.2
Machine zero return mode
X20.3
Single step mode X20.4
Manual mode X20.5
MPG mode X20.6
DNC mode
X20.7
Skip
X21.0
Single block
X21.1
Dry run
X21.2
Miscellaneous(M, S, T) lock X21.3
Machine lock X21.4
Selection stop X21.5
Program restart
X21.6
Spindle CW
X22.0
Spindle stop
X22.1
Spindle CCW
X22.2
Spindle negative override X22.3
Spindle override cancel X22.4
Spindle positive override
X22.5
Spindle jog
X22.6
Lubrication
X23.0
Cooling
X23.1
Chip removal X23.2
Cycle start X23.6
Feed hold X23.7
Feedrate positive override
X24.0