GSK218M CNC System Connection and PLC Manual
111
completion signal FDURING down edge (“1” to “0” ), the operation is ended.
For the new mode, when CNC has detected the skip of one completion
signal, it confirms the operation is ended. Besides, for the general mode,
M/S/T/B function have one common completion signal(FIN), but for the new
mode, they have different endsignal, the completion signal of M, S, T, B
function are separately MFIN, SFIN, TFDURING and BFIN. High-speed
interface is also used for many M instructions of one block, and the interface
provides sole completion signal for every M code, separately calling MFIN,
MFIN2 and MFIN3. The transmission time sequence of many M code
signals during one block is the same that of one M code signal during one
block. The high-speed interface is also used for external operation function.
Besides, the exclusive external operation EFD and completion signal EFIN.
The receiving and transmission of the signals are the same that of optional
singal and completion signal of miscellaneous function.
Signal 1
st
M function completion signal
MFIN1<G000#1>
[
Classfication
]
Input signal
[Function] Reports that the execution of a miscellaneous function using the
high-speed M/S/T/B interface is completed.
[Operation] For the operation and procedure of the control unit, see Basic
Procedure.
。
Spindle function completion signal
SFIN<G000#4>
[Classfication] Input signal
[Function] Reports that the execution of a spindle speed function using the
high-speed M/S/T/B interface is completed.
[
Operation
]
For the operation and procedure of the control unit, see Basic
Procedure.
Tool function completion signal
TFIN<G000#5>
[Classfication] Input sigal
[Function] Reports that the execution of a tool function using the high-speed M/S/T/B
interface is completed.
Summary of Contents for 218M
