GSK 218M, Connection And Plc Manual

Page: 149 / 227

GSK218M CNC System Connection and PLC Manual
146
Search: directly input the required element name, press 【
½
】 to search up and press 【
¾
】
to search down after the data on screen is displayed,
Save: press <
STORE
> to save the modified ladder.
Ladder programming example:
1. position the cursor to the initial position of programming, press
【 】
and there is
normally-open contact symbol at the cursor position, directly input the element name X1.4
and press <
ENTER
> and X001.4 appears at the current cursor position.
2. right move the cursor, press 【 】 , and there is there is normally-open contact symbol at
the cursor position, directly input the element name X2.1 and press <
ENTER
> and X002.1
appears at the current cursor position.
3. position the cursor to the initial positionof next line, press
【 】
, there is there is
normally-open contact symbol at the cursor position, directly input the element name X2.4
and press <
ENTER
> and X002.4 appears at the current cursor position.
4. right move the cursor, press 【 —— 】 , and draw a horizontal conductive line at the current
cursor position.
5. up move the cursor, press 【 】 , and draw a vertical conductive at the current cursor
position.
6. press 【
—( )
】 and the system automatic create the ouput coil, namely the necessary
horizontal conductive line. Directly input the element name G1.0, press <
ENTER
> and
G001.0 appears at the current cursor position.
The programmed ladder is as Fig. 2-3-1:
G001.0
X001.4 X002.1
X002.4
Fig. 2-3-1 Ladder example
Note: The green element in the ladder is turned on no matter that it is normally-open and
normally-closed or outputs the coil, and the white indicates it is turned off (owing to the
printing, the dark stands it is turned off, and the light stands it is turned on.)
2.4 Function instruction
Press
【
B. INST
】
during Fig. 2-1-1 to enter the basic instruction operation interface as Fig.
2-4-1.