GSK218M CNC System Connection and PLC Manual
219
contact
X0051
Tool magazine forward in-position
Normal open or
normal close
X0052
Tool magazine backward in-position
Normal open or
normal close
X0053
Tool magazine CCW/CW in-position
Normal open or
normal close
X0054
Tool magazine zero return in-position
Selection
2
)
. Output:
Address
Statement
Remark
Y0002
Tool release/clamp
Y0020 Spindle
enabling
Y0021 Spindle
orientation
Y0030
Tool magazine CCW
Y0031
Tool magazine CW
Y0032
Tool magazine forward
Y0033
Tool magazine backward
C. Tool magazine switch type and rotation in-position mode selection
Tool magazine no zero return switch set K0101 to 0
Tool magazine zero return switch set K101 to 1
Tool magazine zero return switch is normal open set K0102 to 0
Tool magazine zero return switch is normal close set K0102 to 1
Tool magazine infeed switch is normal open set K0103 to 0
Tool magazine infeed switch is normal close set K0103 to 1
Tool magazine retraction switch is normal open set K0104 to 0
Tool magazine retraction switch is normal close set K0104 to 1
Tool magazine count switch is normal open set K0105 to 0
Tool magazine count switch is close open set K0105 to 1
Tool magazine rotation in-position A mode set K0100 to 0
Tool magazine rotation in-position B mode set K0100 to 1
Note:
1. K0102 setting is disabled when K0101 is set to 0.
2. The tool magazine rotation in-position A mode: when the tool magazine rotates
the normal stop position, the tool magazine count switch has not responded the
block(See Fig. A).
3. The tool magazine rotation in-position A mode: when the tool magazine rotates
Summary of Contents for 218M
