GSK 218M, Connection And Plc Manual

Page: 103 / 227

GSK218M CNC System Connection and PLC Manual
100
increase with the feedrate can be suppressed. The tool can then follow specified path
accurately and errors during the machining profile can be reduced.
This funcitno becomes effective when advanced preview control mode as follows:
(1) Linear acceleration/deceleration before interpolation for cutting feed
(2) Automatic corner deceleration function
Signal Advanced preview control mode signal
G08MD<F013#0>
[
Classfication
] Output signal
[
Function
] Inform that the control is during the advanced preview control
mode.
[
Output conditions
] The signal is “1” when:
·During advanced preview control mode
The signal is “0” when:
·It is not during advanced preview control mode
Signal address
7.3 In-position check
General Whether the position of the servo motor is withduring a specified range is checked.
If the in-position check function is enabled, the CNC checks the position during
deceleration. If the position is found to exceed the specified range, the CNC does not
execute the next block.
Signal In-position signal
INP1
～
INP4<F018
>
[
Classfication
] Output function
[
Function
] These signals indicate that the control axes are set to the
in-position condition.
They are provided for each control axis, and the number during the signal name corresponds to
the control axis number.
I N Px
1 1
┉
st
axis is set to the in-position condition
2 2
┉
nd
axis is set to the in-position condition
3 3
┉
rd
axis is set to the in-position condition
4 4
┉
th
axis is set to the in-position condition
[Output conditions] These signal become “1” when:
G08MD
F013
＃
7
＃
6
＃
5
＃
4
＃
3
＃
2
＃
1
＃
0