GSK 218M, Connection And Plc Manual

Page: 105 / 227

GSK218M CNC System Connection and PLC Manual
102
7.5 Override
7.5.1 Rapid traverse override
General
F0
，
25
％，
50
％，
100
％
can be used for the rapid traverse rate.
F0 is set by P093.
Feedrate Actual federate is obtained by multiplying the rapid traverse rate preset by
parameter P088~092 by the override value determined by this signal,
whether during automatic or manual operation(including manual refernce
point return).
F0 It is set by P093.
Signal Rapid traverse override signal
Rapid F0 （
G025
＃
0
）
Rapid
F25%
（
G025
＃
1
）
Rapid
F50%
（
G025
＃
2
）
Rapid
F100%
（
G025
＃
3
）
［ Classfication ］ Input signal
［
Function
］
These signals are for rapid traverse rate override.
7.5.2 Feedrate override
General
A programmed feedrate can be reduced or increased by a percentage selected by
the override dial. This feature is used to check a program. For example, when a
feedrate of 100 mm/mduring is specified during the program, setting the override dial
to 50% move the tool at 50 mm/min.
Signal
Feedrate positive override signal
（
G24#0
）
Feedrate negative override signal
（
G24#2
）
［
Classfication
］
Input signal
［
Function
］
Cutting feedrate override signal. 16 steps (0%~150%).