GSK 218M, Connection And Plc Manual

Page: 137 / 227

GSK218M CNC System Connection and PLC Manual
134
Appendix
Signal list (During order of address)
F signal
Address Signal name Symbol Reference item
F000#4 Feed hold alarm signal SPL 5.1
F000#5 Cycle start alarm signal STL 5.1
F000#6 Servo ready completion signal SA 2.2
F000#7 Automatic operation signal OP 5.1
F001#0 Alarm signal AL 2.4
F001#1 Resetting signal RST 5.2
F001#3
Distribution completion signal
DEN
8.1
F001#4 Spindle enable signal ENB 9.3
F001#5 Tapping signal TAP 11.2
F001#6 Cancellign rigid tapping signal D TAP 11.2
F002#0 Inch input signal INCH 11.3
F002#1 Rapid traversing signal RPDO 2.8
F002#2 Constant surface speed signal CSS 9.3
F002#3 Thread cutting signal THRD 6.4
F002#4 Program start signal SRNMV 5.5
F002#6 Cuuting feed signal CUT 2.8
F002#7 Dry run check signal MDRN 5.3.2
F003#0 Incremental feed select check
signal MINC 2.7
F003#1 MPG feed select check signal MH 2.7
F003#2 JOG feed select check signal MJ 2.7
F003#3 Manual data input select check
signal MMDI 2.7
F003#4 DNC operation selection
confirm signal MRMT 2.7
F003#5 Automatic operation select
check signal MMEM 2.7
F003#6 Memory edit select check signal MEDT 2.7
F003#7 Machine zero return select
check signal MZRO 2.7
F004#0 Skip optional block check signal MBDT 5.4
F004#1 All-axis machine lock check
signal MMLK 5.3.1
F004#3 Single block check signal MSBK 5.3.3