GSK 218M, Connection And Plc Manual

Page: 112 / 227

GSK218M CNC System Connection and PLC Manual
109
8.2 Auxiliary function lock
General
Inhibits execution of a specified M, S, and T function. That is, code signals and
strobe signals are not issued. This function is used to check a program.
Signal Auxiliary function lock signal
AFL
（
G021
＃
3
）
［
Classfication
］
Input signal
［ Function ］ The signal selects the auxiliary function lock, i.e., the signal disables the
execution of the specified M, S, T function.
［ Operation ］ When the signal becomes 1, the control unit functions are as follows:
1. The control unit does not execute M, S, and T functions. That is, the
control unit stops the output of code signals and strobe signals.
2. If this signal becomes “1” after code signal output, the output operation
is executed during the ordinary manner until its completion( that is,
until the FDURING signal is received, and the strobe signal becomes
to “0”.)
3. Among the miscellaneous function, M00,M01
，
M02 and M30 are
executed even when this signal is “1”. All code signals, strobe signals,
decode signals are output during the ordinary manner.
4. Even when this signal is “1”, M98 and M99 are executed during the
M31 M30 M29 M28 M27 M26 M25 M24
F033
S07 S06 S05 S04 S03 S02 S01 S00
F022
S15 S14 S13 S12 S11 S10 S09 S08
F023
S31 S30 S29 S28 S27 S26 S25 S24
F025
T07 T06 T05 T04 T03 T02 T01 T00
F026
T15 T14 T13 T12 T11 T10 T09 T08
F027
T23 T22 T21 T20 T19 T18 T17 T16
F028
T31 T30 T29 T28 T27 T26 T25 T24
F029
S23 S22 S21 S20 S19 S18 S17 S16
F024