GSK 218M, Connection And Plc Manual

Page: 191 / 227

GSK218M CNC System Connection and PLC Manual
188
=0: Z-axis feed reverse.
System parameter number
0 1 9 IOV DEC ITX MALX
MALX
=1: When the driver alarms, high level is enabled.
=0: When the driver alarms, low level is enabled.
ITX
=1: Each-axis lock signal is disabled.
=0: Each-axis lock signal is enabled.
System parameter number
0 0 4 IDG XIK AZR SFD DLZ JAX
JAX
=1: Simultaneous controlled axis during JOG, manual rapid, manual reference point
mode: 3 .
=0: Simultaneous controlled axis during JOG, manual rapid, manual reference point
mode: 1.
DLZ
=1: Function for setting the reference point without dogs: enabled.
=0: Function for setting the reference point without dogs:disabled.
AZR
=1: When the reference point is not set, G28: alarm.
=0: When the reference point is not set, G28: use dogs.
XIK
=1: Non-linear positioning aixs is interlocked: all-axis stops moving.
=0: Non-linear positioning aixs is interlocked: interlock.
4.14 Parameter for coordinate system
System parameter number
0 0 9 AWK ZCL
ZCL
=1: The local coordinate system is canceled when the manual reference point return
is performed.
=0: The local coordinate system is canceled when the manual reference point return
is not performed.
4.15 Parameter for feedrate
System parameter number
0 1 2 RDR TDR RFO LRP RPD
RPD
=1: Manual rapid traverse during the period from power-on time to the completion of
the reference point return is enabled.