GSK 218M, Connection And Plc Manual

Page: 200 / 227

GSK218M CNC System Connection and PLC Manual
197
X0024 External clamping/releasing tool control Normally open conatact
X0025 Releasing tool check Normally open conatact
X0026 Clamping tool check Normally open conatact
X0027 Undefined
X0030 Undefined
X0031 Undefined
X0032 Undefined
X0033 Undefined
X0034 Undefined
X0035 Undefined
X0036 Undefined
X0037 Undefined
X0040 Undefined
X0041 Spindle gear-1 in-position Normally open conatact
X0042 Spindle gear-2 in-position Normally open conatact
X0043 Spindle gear-3 in-position Normally open conatact
X0044 Undefined
X0045 Undefined
X0046 Spindle speed arrival Normally closed contact
X0047 Spindle zero speed arrival Normally closed contact
X0050 Spindle orientation in-position Normally closed contact
X0051 Tool magazine forward in-position Determined by the paramter
X0052 Tool magazine backward in-position Determined by the paramter
X0053 Tool magazine CCW/CW in-position Determined by the paramter
X0054 Tool magazine zero return in-position Determined by the paramter
X0055 Undefined
X0056 Undefined
X0057 Undefined
X0060 External MPG X axis selection Normally open conatact
X0061 External MPG Y axis selection Normally open conatact
X0062 External MPG Z axis selection Normally open conatact
X0063 External MPG A axis selection Normally open conatact
X0064 External MPG step 0.001 Normally open conatact
X0065 External MPG step 0.01 Normally open conatact
X0066 External MPG step 0.1 Normally open conatact
X0067 External emergency stop Normally closed contact
Note:
(1) Refer to
Volume Four
about PMC input (X) connection method.
(2) Contact selection: normally open contact and normally closed contact. The contact is
determined to be normally open or normmaly closed,
(3) When the ladder is used, the user can add the new function for the undefined input.
Table 2 Output signal interface definition
Address Definition Remark
Y0000 Z axis holding brake