GSK 218M, Connection And Plc Manual

Page: 152 / 227

GSK218M CNC System Connection and PLC Manual
149
2.6 Edit instruction
DATA MEA
Emergency switch
MDI
PLCGRA Ln
：
000/429 RUN
G012.0
X001.4
【COPY】 【PASTE】【DEL】
【REPLASE】
G001.0
X000.0
X000.1
X000.2
X000.3
X000.4
X000.5
X000.6
X000.7
G012.1
G012.2
G012.3
G013.0
G013.1
G013.2
G013.3
G017.0 X001.0 G020.0 G020.4 G020.5 G020.6
【RETURN】
Contents and operations on instruction list interface:
LINE: displaying the current position of cursor and total line number of ladder
RUN: operation state of ladder
Data/serial number: displaying input data. The serial number appears by pressing <
SEARCH
> on
the panel to search the data. The CNC returns to the data displaying interface
after press <CANCEL>.
MDI mode: current operation mode.
【
COPY
】 ：
after inputting G12.1, press it and the ladder between the cursor and G12.1 can
be copied.
【
PASTE
】 ：
paste the copied ladder.
【 DELETE 】 ： after inputting G12.1, press it and the ladder between the cursor and G12.1
can be deleted.
【 CHANGE 】 ： input the signal address needed to change, and press the key, the system
prompts if the address is changed or all addresses are changed.
Y ： YES ； N ： NOT ； A ： ALL
Press the Page Up/Page Down, four Direction keys to search and position, view
the instruction list address.