GSK 218M, Connection And Plc Manual

Page: 155 / 227

GSK218M CNC System Connection and PLC Manual
152
Fig. 3- 1- 1
Contents and operations on counter interface:
OPERATION ： operation state of ladder.
N0.
：
counter number, cannot be changed.
ADDRESS ： counter address, cannot be changed.
CURRENT
：
counter current value, cannot be changed.
SET ： counter preset value, can be changed during MDI mode.
Data/serial number: displaying input data. The serial number appears by pressing
<
SEARCH
> on the panel to search the data. The CNC returns to
the data displaying interface after press <CANCEL>.
MDI mode: current operation mode.
【
Esc
】 ：
return to the up menu.
Press <
CHANGE
> to download the setting value to operation the CNC. When the change is
completed, the system displays: CTR Downloaded OK ! , when the change is not completed,
the system displays: Can’t download !
(Note: press
【
CHANGE
】
after modification to save the modification and operation the CNC.
Press the Page Up/Page Down, four Direction keys to search and position, view or modify the
counter address.
3.2 Timer
Press
【
TMR
】
during Fig. 3-1 to enter the view and the setting interface of counter as Fig. 3-2-1.
N0. ADDRESS CURRENT SET
0000 T 000 00000 00100
0001 T 001 00000 00100
0002 T 002 00000 00100
0003 T 003 00000 00100
0004 T 004 00000 00100
0005 T 005 00000 00100
0006 T 006 00000 00100
0007 T 007 00000 00100
0008 T 008 00000 00100
0009 T 009 00000 00100
0010 T 010 00000 00100
0011 T 011 00000 00100
PLCPara
MDI
RUN
【CTR】 【TMR】 【DATA】
【RETURN】 【KPAR】
Fig. 3- 2- 1
Contents and operations on counter interface: