manualshive.com logo in svg

GE Revolution CT, User Manual

Share
Download
GE Revolution CT User Manual Download Page 624

Illustration 5:  Oral Contrast window

3.4.2.1  Add Contrast

1. Click in the 

Agent

 field and enter the new contrast agent name.

2. Click in the 

Concentration

 field and enter a value for the concentration.

3. Click [Add] to add the new contrast agent to the list.
4. Click [Save] to save the new preference, or [Save and Close] to additionally close the

System Preferences

 window.

3.4.2.2  Edit Contrast

1. Select a contrast agent from the list.
2. Click in the 

Agent

 field and edit contrast agent name.

3. Click in the 

Concentration

 field and edit the value for the concentration.

4. Click [Save] to save the new preference, or [Save and Close] to additionally close the

System Preferences

 window.

3.4.2.3  Delete Contrast

1. Select a contrast agent from the list.
2.

Click 

 next to the contrast agent name.

3. Click [Save] to save the new preference, or [Save and Close] to additionally close the

System Preferences

 window.

Revolution CT User Manual

Direction 5480385-1EN, Revision 1

624

3  System Preferences

Summary of Contents for Revolution CT































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands