manualshive.com logo in svg

GE Revolution CT, User Manual

Share
Download
GE Revolution CT User Manual Download Page 306

•

If configured, the DICOM SR Dose Report is saved as part of the patient's exam in Series

997.
The DICOM SR Dose Report cannot be opened on the scanner. It can be reviewed and

printed using the Reporting Tool on the Advantage Windows workstation or any station that

can read a DICOM Structured Report. It cannot be saved to DVD or CD on the Advantage

Workstation (AW) system (4.4 or lower).

•

The Dose Report is saved as a secondary capture image in Series 999. It can be archived

and networked after the scan is completed.
NOTE:

If you edit patient information for an exam, the Dose SR report will be excluded

from the edited patient information due to the format of the files. Dose Report

Series 999 will be updated using the edited information.

8.5   Dose Information

Illustration 30:  Dose Information

Number

Description

1

Dose Display area

2

Dose Report

Revolution CT User Manual

Direction 5480385-1EN, Revision 1

306

8  Additional Scan Features

Summary of Contents for Revolution CT































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands