manualshive.com logo in svg

GE Revolution CT, User Manual

Share
Download
GE Revolution CT User Manual Download Page 110

Number

Icon

Description

2

System Utilities Icon

A collection of all necessary user maintenance calibration routines and other utility func‐

tions.

Opens the 

System Utilities menu with the following selections:

•

Daily Prep

○

Tube Warm Up

○

Fast Cal

•

System Tools

Message Viewer

•

Service

○

Service Tools

○

Check Security

•

Troubleshooting

○

iLinq

○

Unix Shell

○

SPR Snap

3

Recon Management Icon

Opens the 

Recon Management window to list the in progress and completed reconstruction

jobs.

4

Tube Status Icon

Provides information and functions related to the current state of the scanner x-ray tube.

5

Available Disk Space

Communicates the amount of available disk space on the system. A warning alerts the user

of low disk space.
NOTE:

GE recommends that you remove images when the image space falls below

1,000 images. This ensures enough disk space for acquiring and reconstruct‐

ing images. Do not remove images while scanning, restoring, or receiving im‐

ages.

6

System Messages

Click on the message for a list of all system messages.

7

Date and Time

The current date and time.

3.2  Reconstruction and Image Processing Area

This area allows you to define additional image processing tasks during the scan process,

including reconstructions and manual and automatic reformats, in one centralized location. It

also allows you to monitor both the creation and transfer of those image sets.

Revolution CT User Manual

Direction 5480385-1EN, Revision 1

110

3  Image Monitor

Summary of Contents for Revolution CT































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands