manualshive.com logo in svg

GE Revolution CT, User Manual

Share
Download
GE Revolution CT User Manual Download Page 525

•

Comments: A space to enter text that is associated with the selected node.

4.1.3  Archive Node Settings

Select the Archive Node option to place the selected node in the Archive destinations. Only

devices or nodes that have this option checked can be used as an archive device. Not all hosts

can be used as archive nodes (for example, another CT system cannot be used as an archive

node, but a PACS system can be used as an archive node).
To be a successful archive node, the node must meet certain DICOM requirements so that

when the data is transferred from the host system to the node, the DICOM handshake can be

successful. The remote host must be a DICOM storage permit provider. This is not necessary

for networking images. The same handshake is not required.
The storage commitment host details are populated from the selected Remote Host Information

area. These fields can be edited

Illustration 23:  Archive Node Settings box

4.1.4  SCU and SCP Services

The Services area contains settings for SCU and SCP.

Revolution CT User Manual

Direction 5480385-1EN, Revision 1

Chapter 17  Data Management

525

Summary of Contents for Revolution CT































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands