manualshive.com logo in svg

GE Revolution CT, User Manual

Share
Download
GE Revolution CT User Manual Download Page 328

Icon name

Icon

Description

Inj. Delay (s)

Injection delay can be set in increments of seconds.

•

0 no delay prior to the injection of this phase.

•

1 to max — injection delay of the injector in sec‐

onds prior to the start of this phase. This is a timed

pause.

•

Hold — the injection for this phase is started from

the injector by pressing the start button. This is on‐

ly valid for phases two through five.

Type

Select the type of injection: Saline, Contrast or Contrast-

Saline.

Selecting Contrast-Saline opens the Ratio fields.

Ratio (%)

Available only when 

Contrast-Saline is selected in Type.

The upper frame is for contrast, the lower frame if for

Saline. The range is 5:95 and 95:5.

When mixed phase is set from CT user interface, the in‐

dication of ratio on 

Injector Monitor is dismissed. If you

want to set the ratio on Injector Monitor, those buttons

are displayed.

Pressure Limit

The pressure limit value sets the limit at which when

reached will stop the injection.

Contrast

Saline

The system displays the remaining volume of contrast

media and saline.

Get Injector Parame‐

ters

Selecting [Get Injector Parameters] retrieves the values

currently set on the injector and displays them in the In‐

jector Settings popover. Click [Apply] to choose these

values or click [Cancel] to return to the original values.

Add Phase

Adds a phase.

Delete Phase

Deletes a phase.

Apply

Clicking [Apply] when the injector is armed, disarms the

injector, but the parameters will NOT be updated on the

injector. Open the popover again and click [Apply] to up‐

date the parameters.

Cancel

Parameter values are not updated and remain at the

values present when the pop up window is opened.

NOTE:

There is no Xtream Injector button for Scout scans.

Revolution CT User Manual

Direction 5480385-1EN, Revision 1

328

4  Enhanced Xtream Injector

Summary of Contents for Revolution CT































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands