manualshive.com logo in svg

GE Revolution CT, User Manual

Share
Download
GE Revolution CT User Manual Download Page 163

2.5   Preset W/L keys – F5 through F11

The <F5> through <F11> function keys are used to apply preset Window Width (WW)and

Window Level (WL) values in the following applications: File Manager Viewer, Patient Session

Tab Viewer, and Reformat. The WW/WL values are defined in System Preferences Viewports.
Table 3:   Preset W/L function keys

F key

Description

Translated text

F5

Previous

F6

Abdomen

F7

Head

F8

Lung

F9

Mediastinum

F10

Spine

F11

Vertebrae

2.6   Page Up/Page Down keys

Illustration 5:   Page up and down keys

Use the <Page Up> and <Page Down> to review the next and prior images in a viewport.

2.7   W/L control keys

Illustration 6:   Arrow Keys

Use these keys to change the W/L settings for images in a viewport. The Up/Down keys

increase/decrease the window level and the Left/Right keys decrease/increase the window

width.

2.8   Operate the mouse controls

The two-button mouse with a scroll wheel is used to make selections on the scan and display

monitors.

Revolution CT User Manual

Direction 5480385-1EN, Revision 1

Chapter 8  Equipment

163

Summary of Contents for Revolution CT































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands