manualshive.com logo in svg

GE Revolution CT, User Manual

Share
Download
GE Revolution CT User Manual Download Page 395

4.

Click [Erase selected graphics]  

 to erase all annotations.

4.2  Use MIROI density reading to calculate bolus timing

Use this procedure to calculate the scan delay for a contrast enhanced exam.
Scale for HU, there are two selections.

•

Absolute: has an actual Hounsfield Unit number for each ROI plotted on the graph.

•

Relative: the ROI measured for the first image is set to zero and the change from zero is

plotted for the rest of the images.

1. From the viewport control panel, click the arrow next to 

Measure/Annotate

 to display

measurement icons.

2. Click the [MIROI] button to open the MIROI controls window.

3. Define the region of interest using either the eillipse ROI button or the rect ROI button.
4. Click and drag the ROI to the anatomy of interest. Size the ROI to fit completely inside the

aorta.

5. Click [Plot].
6. Use the graph to calculate the scan delay.
7. Optionally, screen save the graph. Right click and select 

Screen Save

Revolution CT User Manual

Direction 5480385-1EN, Revision 1

Chapter 14  View Images

395

Summary of Contents for Revolution CT































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands