manualshive.com logo in svg

GE Revolution CT, User Manual

Share
Download
GE Revolution CT User Manual Download Page 103

Illustration 6:  Scan Setup window

Number

Description

1

Tabs area.

Displays the patient session.

2

State area.

Indicates the scanning state of the system.

•

Scanning

•

Done Scanning

3

Patient Position area.

•

Shows the patient position and orientation that the patient should be positioned for on the table.

•

Indicates the anatomical reference that the landmark should be set at.

•

Indicates the Auto Voice language category.

4

Scan Timeline area.

View prep group delays and real-time scan progress information. Use the scroll wheel to review all scan

groups.

5

Scan Task List area.

The series scanning tasks to complete an exam.

Task Status

•

No checkmark — Not confirmed

•

Blue background — Confirmed but not scanned

•

Gray background and checkmark — Scanned

6

Scan Settings window.

Set and adjust scan parameters.

Revolution CT User Manual

Direction 5480385-1EN, Revision 1

Chapter 4  Read Me First

103

Summary of Contents for Revolution CT































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands