Disassembly & Reassembly Procedures
DR 003 Replace-Configure PERC 3/DC RAID controller board
Page 263
5.
Power up the computer. A mismatch error message will appear during system BIOS bootup.
6.
When the mismatch error message appears on the monitor screen, press the <Ctrl>+<M>
keys to run the Configuration Utility.
7.
In the Management Menu box, use the arrow and Enter keys to select
Configure > View/Add
Configuration > View Disc Configuration
.
8.
Press
F10
key to initiate autoconfiguration.
9.
When the system asks whether to Save Configuration, answer
Yes
(with arrow & Enter keys).
10.
Exit the Configuration Utility.
11.
Reboot the system when prompted. The mismatch error message should not occur on this
boot.
12.
Power down the computer and reconnect the two SCSI cables from the RAID unit.
13.
Power up the RAID unit (both power switches).
14.
Power up the Dell 1400 computer.
15.
Double-click on My Computer in the Dell 1400 desktop and look for the RAID unit represented
as a hard disk [
RA600 wgs(F:)
].
If the RAID unit does not appear, reboot the computer one more time.
Summary of Contents for Centricity RA600
Page 16: ...Introduction Page 16 Illustration 1 2 Computer Unit Front View ...
Page 24: ...Introduction Page 24 Modality Type Description IP Address S M GW Port AE Title ...
Page 206: ...Software Procedures SW 006 Single Media Archive SMA Install Configure Test Page 206 ...
Page 274: ...Renewal Parts Page 274 Jorge Aguirre med ge com Maurice Robert med ge com ...
