Software Procedures
SW 006 Single Media Archive (SMA) Install, Configure & Test
Page 202
a.
For the Media Type, select Read Only from the drop down list.
b.
For the Device selection, click the
Browse
button and navigate to the CD write device.
Highlight the device and click
OK
.
c.
For the Total Size field, enter the size of the CD capacity that will be used in the device, e.g.
650 or 700 MB.
d.
If you want to add some fles (e.g. cdviewer) check the
Copy files
checkbox and browse to
the folder where the files are located. Highlight the desired file(s) and click
OK
on the Browse
dialog box.
e.
For the Image directory field, browse the directory where images will be temporarily held
while they are burned onto the CD, highlight that directory and click
OK
.
f.
Check the
Verify burned contents checkbox
if you want the system to do verify the SMA
CD write process.
g.
Check the
Delete marked studies after archiving
checkbox only if you want to delete the
studies from the RadWorks (RA600) short-term storage after they are written to the SMA CD.
Note:
Additional configuration items are shown in the following graphic.
Summary of Contents for Centricity RA600
Page 16: ...Introduction Page 16 Illustration 1 2 Computer Unit Front View ...
Page 24: ...Introduction Page 24 Modality Type Description IP Address S M GW Port AE Title ...
Page 206: ...Software Procedures SW 006 Single Media Archive SMA Install Configure Test Page 206 ...
Page 274: ...Renewal Parts Page 274 Jorge Aguirre med ge com Maurice Robert med ge com ...
