CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.2.22
2.3.2.8.3
Comms Settings
A menu option that prevents the installer changing the communication settings
(telephone numbers, account codes and so on). This option must be set using
the up/download software.
2.4.2.8.4
Download Settings
A menu option that prevents the installer changing the following download
settings:
Answer Machine Defeat
Call Back Req’d
Lockout>System Shutdown
Lockout>Local Programming
Lockout>Comms Settings
Lockout>Download Settings
Call PC on Autotest
This option must be set through the up/download software.
2.4.3
Autotest
A menu entry that groups options that configure the automatic test run by the
system.
2.4.3.1
Autotest Control
A menu option that specifies whether the autotest occurs after a specified
number of days or hours. The autotest can be suppressed if another report
has been sent.
2.4.3.2
Interval
A menu option that sets the length of time between autotests. The unit is set in
autotest control. The Hour and Minute options set the time at which the test is
performed.
2.4.3.5
Time Since Test
A menu option that sets the length of time since the last autotest. It controls
when the next autotest report is sent to the central station.
2.4.4
Reporting
A menu entry that groups reporting options.
2.4.4.1
Partition Reports
A menu option that specifies the events that are enabled for each partition.
Events specified in this option are related to all partitions in the system.
2.4.4.1.1
Opening/Closings
A menu option that enables opening/closings reporting.
2.4.4.1.2
Zone Bypass
A menu option that that sends a report to the central station when zones are
bypassed.
2.4.4.1.3
Zone Restore
A menu option that sends a report to the central station when zones are
restored.
2.4.4.1.4
Zone Trouble
A menu option that sends a report to the central station when a zone trouble
condition occurs.
2.4.4.1.5
Zone Tamper
A menu option that sends a report to the central station when a zone tamper
occurs.
2.4.4.1.6
Cancel
A menu option that enables cancel reporting. A cancel report is sent to the
central station when the system is disarmed (within the time specified by the
dialler delay) after an alarm.
2.4.4.1.7
Recent Closing
A menu option that sends a report to the central station if an alarm occurs
within five minutes after the panel has been armed. The user number that
armed the system is also sent.
2.4.4.1.8
Exit Error
A menu option that specifies that the control panel sends an exit error report if
an entry/exit zone is faulted when the exit delay expires. This report is sent
along with the user number that armed the system, if the panel is not disarmed
before the entry delay expires. The alarm report is also sent. Even if this
feature is not enabled, the siren sounds if any entry/exit zone is faulted when
the exit delay expires.
2.4.4.2
System Reports
A menu entry that groups options relating to system reports.
Location
Term
Definition
