CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.13.6
13.3.2.5 Control panel/CS7002 as backup for CS7002
Backup reports are sent when the CS7002 fails to send primary reports. Backup reports can be sent by another
report control on the module or by another device on the system.
13.3.2.6 CS7002 as backup
•
Set a report control to
Report When>Report Always
.
•
Program the first and backup report destinations to one of the TCP/IP or SMS destinations or set another
report control as
Report control>Backup.
13.3.2.7 Control panel as backup
When the CS7002 fails to report, it sends an expansion event which the control panel or auxiliary dialler reports.
•
Set a report control to
Report When>Report Alway
s.
•
Set the backup destination to
Other Dialler
.
•
Enable the autotest report on the panel phone events and panel system events.
•
Ensure the reporting format on the dialler is the same as that set in
CS7002
GPRS>Module>Reporting>Backup Format
.
13.3.3 Using upload/download
13.3.3.1 GSM CSD connection.
The upload/download access code is set on the control panel in
Communications>Up/Download>Access Code
.
For more information, see chapter B-2
Programming the control panel
. The following example configures the
CS7002 GPRS module to answers calls from phone number 5666666 only. The PC initiates the upload/
download session.
1.
Navigate with the
µ¶
keys to C
S7002 GPRS Module>Up/Download
and press
OK
.
2.
Scroll to
Remote Initiated>Enabled
and press
OK
.
3.
The keypad beeps once to accept the change and returns to
Remote Initiated
.
4.
Scroll to
Phone Number
and press
OK
.
5.
Press
#
¶
to clear the current value.
6.
Enter 5666666 and press
OK
.
7.
The keypad beeps once to accept the change and returns to
Phone Number
.
8.
You must configure the CS7002 data phone number on the upload/download PC. Ask your network provider
for this number.
9.
You must also configure the GSM modem on the upload/download PC. Select
Program>Setup>GSM
Modem setup
. Enter
S7=60S10=MS=9,1,9600,9600
in the
Initialization string 2
field.
13.3.3.2 GPRS CSD connection.
The connection is made via a TCP/IP network. Instead of a phone number, an IP address is set. The
Call Back
Req’d
and
Allow Calls From
options are disabled.
