CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.2.31
2.7.3.2
Closing/Autoarm
A menu option that sets the time after which the partitions selected in
Partitions Autoarming start to arm automatically. Users with arm only after
closing rights can arm the partitions selected in Partitions Opening only after
this time.
2.8
Home Automation
A menu entry that groups options relating to the home automation system.
2.8.1
Protocol
A menu option that sets the home automation protocol to binary or ASCII.
2.8.2
Transition Broadcasts
A menu entry that groups methods of sending updated information to the
home automation system from the RS232 interface.
2.8.2.1
Interface Configuration
A menu option that enables interface configuration transition broadcasts.
These broadcasts transmit changes to zones, partitions and so on to the home
automation system.
2.8.2.2
Zone Status
A menu option that sends the entire status for one zone.
2.8.2.3
Zone Snapshot
A menu option that allows the control panel to send a snapshot of the current
status of the zones. A snapshot sends the tripped, bypassed, trouble/tamper
and alarm memory state for sixteen zones. This is done on a zone-by-zone
basis.
2.8.2.4
Partition Status
A menu option that enables partition status transition broadcasts.
2.8.2.5
Partition Snapshot
A menu option that enables partition snapshot transition broadcasts.
2.8.2.6
System Status
A menu command request sent by the home automation system to the CS586
direct connect module to transmit the system status.
2.8.2.7
X-10 Message
A menu option that enables X-10 message transition broadcasts.
2.8.2.8
Log Event
A menu option that enables log event transition broadcasts.
2.8.2.9
Keypad Message
A menu option that allows the home automation protocol to send different end-
user messages to the keypad display.
2.8.3
Commands/Requests
A menu option that performs commands sent to the serial port module by the
home automation system.
2.8.3.1
Misc Requests
A menu entry that groups home automation requests.
2.8.3.1.1
Interface Configuration
A menu option that enables the control panel to respond to interface
configuration requests sent by the home automation system.
2.8.3.1.2
Zone Name
A menu option that enables the home automation system to change zone
names on the control panel.
2.8.3.1.3
Zone Status
A menu option that enables the control panel to respond to zone status
requests sent by the home automation system.
2.8.3.1.4
Zone Snapshot
A menu option that enables the control panel to respond to zone snapshot
requests sent by the home automation system.
2.8.3.1.5
Partition Status
A menu option that enables the control panel to respond to partition status
requests sent by the home automation system.
2.8.3.1.6
Partition Snapshot
A menu option that enables the control panel to respond to partition snapshot
requests sent by the home automation system.
2.8.3.1.7
System Status
A menu request sent by the home automation system to the CS586 direct
connect module to view the system status of the entire system.
2.8.3.1.8
Log Event
A menu option that causes the control panel to log an event each time an
output on the CS507 output expander module trips and each time an output
restores.
Location
Term
Definition
