CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.12.1
Chapter 12: Setting up the CS1700
12.1 Overview
The CS1700 is a proximity card reader/door control module. Up to 15 readers can be connected to the CSx75
control panel, depending on the model of panel. The CS1700 can be programmed to control access in any or all
areas. The LEDs can be programmed to follow the output and/or the armed or ready status of the system. It has
an optional optical tamper switch. The CS1700 proximity reader can be used only with the CS375, CS575 and
CS875.
There are three badging actions that can activate a particular function or an X-10 device. These actions are
different depending on whether you are in default mode or legacy mode.
In default mode:
•
Single badge (1 beep) - a proximity card is held against the proximity reader for one beep.
•
Double badge (2 beeps) - a proximity card is held against the proximity reader for two beeps.
•
Badge hold (3 beeps) - a proximity card is held near the proximity reader for three beeps.
In legacy mode:
•
Single badge (1 beep) - a proximity card is held once against the proximity reader.
•
Double badge (2 beeps) - a proximity card is held against the proximity reader twice within the time set in
Scan Time
.
•
Badge hold (3 beeps) - a proximity card is held near the proximity reader for longer than the time set in
Scan
Time
.
12.2 Installing the CS1700 proximity reader
1.
Place the screws in the screw holes of the CS1700 proximity reader. Attach to the door.
2.
Place the cover on the CS1700 proximity reader.
