CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.15.5
10. Navigate with the
µ¶
keys to
Options>Reporting>Report Format
and select the format relevant for your
central station receiver.
11. The keypad beeps once to accept the change and returns to
Report Format
.
12. Navigate with the
µ¶
keys to
E-mail Reporting>E-mail Server>Domain Name
and press
OK
.
13. Enter the domain name of the server to which reports are sent and press
OK
.
14. The keypad beeps once to accept the change and returns to
Domain Name
.
15. Scroll to
E-mail Server>IP Address
and press
OK
.
16. Enter the IP address of the server to which reports are sent and press
OK
.
17. The keypad beeps once to accept the change and returns to
IP Address
.
15.3.3 Configuring reporting options
The CS7050 TCP/IP module can send primary, backup and dual reports. The following steps explain how to
configure each type of report.
1.
Navigate with the
µ¶
keys to
CS7050 TCP/IP Module>Options>Reporting
and press
OK
.
2.
To use another CS7050 receiver as backup, select
Receiver 2 as Backup>Enabled
and press
OK
.
3.
To use the control panel as backup:
-
Select
Control Panel is Backup>Enabled
and press
OK
.
-
Enable autotest report on the control panel phone events and panel system events.
-
Ensure the reporting format used by the control panel is the same as that set in
Report Format
.
4.
To configure dual reporting:
-
Select
Receiver 2 as Backup>Disabled
and press
OK
.
-
Select
Control Panel is Backup>Disabled
and press
OK
.
-
Enable all event categories on the control panel.
15.3.4 Configuring upload/download
To enable upload/download, you must configure the session initiation settings on the CS7050 TCP/IP module and
specify the PC IP address and port. The upload/download access code is set on the control panel. The following
example enables download sessions during test calls. The calls are initiated from a central station (IP address
192.37.57.3) using the TCP/IP alarm port.
1.
Navigate with the
µ¶
keys to
CS7050 TCP/IP Module>Up/Download
and press
OK
.
2.
Scroll to
Remote Initiated>Enabled
and press
OK
.
3.
The keypad beeps once to accept the change and returns to
Remote Initiated
.
4.
Scroll to
IP Address
and press
OK
.
5.
Enter
192.37.57.3
and press
OK
.
6.
The keypad beeps once to accept the change and returns to
IP Address
.
7.
Scroll to
Auto U/D at Test Time>Enabled
and press
OK
.
8.
The keypad beeps once to accept the change and returns to
Auto U/D at Test Time
.
