CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.13.9
13.1.3
SMS Reporting
A menu entry that groups SMS reporting options.
13.1.3.1.1
Phone Number
A menu option that sets the phone number to which SMS reports are sent.
13.1.3.1.2
Account Code
A menu option that specifies the unique code sent from the modem in the
control panel or dialler to the selected report control. This code is used to
identify and charge the user. Separate account codes can be set up for each
phone number and each partition. This is also known as the account number.
The letters B, C, D, E and F can be included in control panel account codes.
The letters A, B, C, D, E and F can be included in CS7002 GPRS module
account codes.
13.1.3.1.3
Protocol
A menu option that configures the communicator format used to report to the
selected SMS receiver.
13.1.3.1.3.1
SIA Single Evts
A menu entry that sets SMS reporting options so that events are are grouped
and sent as separate messages to separate account codes.
13.1.3.1.3.2
SIA Comb'd Evts
A menu entry that sets SMS reporting options so that events for separate
account codes can be sent in the same message.
13.1.3.1.3.3
SIA area mods
A menu entry that allows area modifiers to identify partitions.
13.1.3.1.3.4
Contact ID
A menu entry that selects the Contact ID protocol
13.1.4
Partition Account Codes
A menu option that lists the account codes for each partition. The account
code is sent when the relevant partition is reported.
There are two sets of account codes. The first set assigns an account code to
each report destination. The second set assigns an account code to each
partition. If you attempt to use both sets, the partition account code takes
precedence
13.1.5
Report Attempts
A menu entry that groups report options.
13.1.5.1
Max Report Attempts
A menu option that configures the number of attempts the CS7002 makes to
send a report. This can be from 0 to 15.
13.1.5.2
FTC Report Attempts
A menu option that configures the number of attempts that can be made to a
specific report destination before the Fail to Communicate condition is set. This
can be from 1 to 15.
13.1.5.3
Max Reports in 24h
A menu option that configures the maximum number of reports that can be
sent by the CS7002 in 24 hours. The CS7002 stops reporting when the
number of messages in a 24 hours exceeds this number. This can be from 1 to
255. If set to 0, there is no limitation. This applies to SMS and TCP/IP.
13.1.5.4
Report Timeout
A menu option that configures the maximum length of time for each attempt by
the CS7002 to report to each receiver. If the report is not successful during this
time, the attempt is abandoned. This can be from 0 to 255 seconds.
13.1.5.5
Control Panel Timeout
A menu option that configures the maximum time during which the control
panel must report an event. If the CS7002 report control is configured for
secondary reporting and the control panel does not report the event during this
time, the report control reports the event. This can be from 1 to 255 seconds. If
set to 0, the option is disabled.
13.1.6
Backup Format
A menu option that configures the reporting format when using another device
as backup. You must set the same reporting format on the backup device.
13.2
Up/Download
A menu entry that groups options used to control download sessions between
the up/download software and the control panel.
13.2.1
Connection Type
A menu entry that selects a CSD or GPRS connection.
13.2.1.1
CSD
Circuit Switched Data. This communication is used to upload/download data. It
is similar to a modem but it is wireless and built in to the CS7002.
Location
Term
Definition
