CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.1.1
Chapter 1: Enrolling modules
To enroll and default the system modules, you must enable the advanced menu. Select
Commands>Advanced
Menu>Enabled
and press
OK
.
1.1 Enrolling the system modules
When you select the enrol modules process, new modules are enrolled on both the control panel and the keypad.
The keypad must enrol modules in order to display the relevant menu options.
1.
Press
OK
at the system prompt and enter your installer code.
2.
Navigate with the
µ¶
keys to
Enrol Modules>Enrol
and press
OK
.
3.
The keypad starts enrolling the modules. The
Enrolling
message is displayed while enrolment is taking
place (approximately 12 seconds). When the modules have been enrolled, a beep sounds and the message
disappears.
4.
When the modules have been enrolled, the keypad returns to
Enrol
.
5.
Verify the enrolled modules. Navigate with the
µ¶
keys to
Commands
and press
OK
.
6.
Scroll to
Event Log
and press
OK
. When the control panel enrols a module, it adds an enrol event to the
event log. This event contains the module number. Scroll through the event log to verify that each module
has been enrolled.
<
The modules are enrolled each time you leave programming mode. In this case, the Enrolling message is
displayed but no beep sounds.
1.2 Defaulting the modules
Each module can be defaulted. It is recommended that you default each module before modifying its settings.
1.
Navigate with the
µ¶
keys to
Default Settings
in the relevant module menu and press
OK
. In this case,
select
Control Panel>Default Settings
to restore the default control panel settings.
2.
A confirmation message is displayed. Press
OK
to accept the default settings.
3.
The keypad sounder beeps once to confirm the reset.
1.3 Glossary
Location
Term
Definition
1
Enrol Modules
A menu option that activates the process by which the control makes an internal list of all
keypads and modules connected to the system.
1.1
Enrol
A menu entry that groups enrolled module information.
1.2
Number of Modules
A menu option that displays the total number of installed modules.
Enrol
Number of Modules
1.1
1.2