CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.10.5
10.4 Glossary
Location
Term
Definition
10
CS320 Power Modules
A module that provides an additional power supply if the system is using more
peripherals than can be serviced by the panel power supply.
10.1
Power Module 84
A menu entry that groups all options for the selected power module.
10.1.1
Outputs
A menu entry that groups options relating to programmable outputs.
There are two types of outputs; relay and open collector. The control panel
includes up to four auxiliary outputs. The CS320 power module provides
additional outputs.
10.1.1.1.1
Event
Any occurrence such as system arming, faults and alarms.
A menu option that specifies which event activates an output.
10.1.1.1.1.1
Alarms
A menu entry that groups together the alarm events that can be selected to
trigger an output.
10.1.1.1.1.2
Arm/Disarm
A menu entry that groups the events that can be used to trigger outputs.
10.1.1.1.1.3
Communications
A menu entry that groups together the communication events that can be
selected to trigger an output.
10.1.1.1.1.4
Keypads
A menu entry that groups the keypad events that trigger an output.
10.1.1.1.1.5
Sirens
A menu entry that groups together the siren events that can be selected to
trigger an output.
10.1.1.1.1.6
Tamper/Trouble
A menu entry that groups together the tamper and trouble events that can be
selected to trigger an output.
10.1.1.1.1.7
Tests
A menu entry that groups settings related to different tests. These include tests
such as automatic test calls, dynamic battery tests and so on.
10.1.1.1.2
Time Unit
A menu option that specifies whether the outputs are timed in minutes or
seconds.
10.1.1.1.3
Time
A menu option that sets the length of time for which an output is activated. If it
is set to 0, the output follows the event.
10.1.1.1.4
Partitions
A menu entry that lists the partitions assigned to the selected output. The
selected output can be triggered by an event on these partitions.
10.1.1.1.5
Attributes
A menu entry that groups the programmable attributes of the selected output.
10.1.1.1.5.1
Latched
A menu option that causes an output to remain activated until a code is entered
at the keypad.
10.1.1.1.5.2
Code Stops Timer
A menu entry that allows the timer used on programmable outputs to be reset
by entering a valid user code.
10.1.1.1.5.3
Inverted
A menu option that enables a mode that inverts the state of an output (normally
activated and then deactivated when an event occurs).
10.1.1.1.5.4
Disable on Listen-in
A menu option that disables the selected output during listen-in time. This
option is normally used to silence sirens during listen-in. After the listen-in
session, the sirens are activated again.
10.1.2
Users
A menu option that specifies the zone or user number that triggers the output
on the expander module or power module.
10.1.2.1.1
Outputs
A menu option that specifies which outputs the selected user can operate.
10.1.3
Feature Select
A menu entry that groups all optional features relating to the selected module.
