CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.12.4
3.
The keypad beeps once to accept the change and returns to
Keyfob Funct 1
.
12.3.2 Configuring X-10 functions
You can program the X-10 function that is performed when a card is scanned. The following example enables X-
10 device 4 (module number 6, house code B) for the double badge action on proximity reader 113. To activate
the double badge action, you must set the scan time. In this example, it is set to 1 second.
1.
Navigate with the
µ¶
keys to
CS1700 Proximity Readers>Prox Reader 113
and press
OK
.
2.
Scroll to
Feature Select>Card Scan Mode>Single/Double/Hold
and press
OK
.
3.
The keypad beeps once to confirm the change and returns to
Card Scan Mode
.
4.
Navigate with the
µ¶
keys to
Badge Functions>Double Badge (2 Beeps)>Broadcast X10 Function>Yes
and press
OK
.
5.
The keypad beeps once to confirm the change and returns to
Broadcast X10 Function
.
6.
Navigate with the
µ¶
keys to
X-10 Functions>Module Number
and press
OK
.
7.
Select
6
and press
OK
.
8.
The keypad beeps once to confirm the change and returns to
Module Number
.
9.
Scroll to
House Code
and press
OK
.
10. Select
B
and press
OK
.
11. The keypad beeps once to confirm the change and returns to
House Code
.
12. Scroll to
Functions>Double Badge (2 Beeps)>On
and press
OK
.
13. The keypad beeps once to accept the change and returns to
Double Badge (2 Beeps)
.
14. Navigate with the
µ¶
keys to
Miscellaneous>Scan Time
and press
OK
.
15. Select
100 x 10 ms
and press
OK
.
16. The keypad beeps once to accept the change and returns to
Scan Time
.
12.3.3 Adding and deleting cards
To add or delete cards, you must enter information at the keypad and then scan the cards. Before a card can be
added, one CS1700 proximity reader on the system must be programmed to enable user card programming. It is
recommended that only one reader on the system is enabled to do this and that this reader is located near a keypad.
This CS1700 proximity reader transfers information to all other CS1700 proximity readers in the system once
programming is finished. The following example enables user card programming on proximity reader 113.
<
The proximity reader recognizes pre-defined card serial numbers
.
It is not recommended to change these
serial numbers
.
1.
Navigate with the
µ¶
keys to
CS1700 Proximity Readers>Prox Reader 113
and press
OK
.
Table 12-3: CS1700 proximity reader X-10 functions
Function
Description
Function
Description
0
All units off
4
Dim
1
All units on
5
Bright
2
On
6
All lights off
3
Off
