CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.7.7
7.4 Glossary
Location
Term
Definition
7
CS507 Output Expanders
An expander board that increases the number of outputs that can be used with
the control panel.
A menu entry that groups CS507 output expander options.
7.1.1
Outputs
A menu entry that groups options relating to programmable outputs.
There are two types of outputs; relay and open collector. The control panel
includes up to four auxiliary outputs. The CS507 output expander provides
additional outputs.
7.1.1.1.1
Event
Any occurrence such as system arming, faults and alarms.
A menu option that specifies which event activates an output.
7.1.1.1.1.1
Alarms
A CS507 Output Expander menu entry that groups together the alarm events
that can be selected to trigger an output.
7.1.1.1.1.2
Arm/Disarm
A menu entry that groups the events that can be used to trigger outputs.
7.1.1.1.1.3
Communications
A menu entry that groups together the communication events that can be
selected to trigger an output.
7.1.1.1.1.4
Keypads
A menu entry that groups the keypad events that trigger an output.
7.1.1.1.1.5
Sirens
A menu entry that groups together the siren events that can be selected to
trigger an output.
7.1.1.1.1.6
Tamper/Trouble
A menu entry that groups together the tamper and trouble events that can be
selected to trigger an output.
7.1.1.1.1.7
Tests
A menu entry that groups settings related to different tests. These include tests
such as automatic test calls, dynamic battery tests and so on.
7.1.1.1.2
Zone/User
A menu entry that specifies that the selected event must occur on a specific
zone or by a specific user.
7.1.1.1.3
Time Unit
A menu option that specifies whether the outputs are timed in minutes or
seconds.
7.1.1.1.4
Time
A menu option that sets the length of time for which an output is activated. If it
is set to 0, the output follows the event.
7.1.1.1.5
Partitions
A menu entry that lists the partitions assigned to the selected output. The
selected output can be triggered by an event on these partitions.
7.1.1.1.6
Attributes
A menu entry that groups the programmable attributes of the selected output.
7.1.1.1.6.1
Latched
A menu option that causes an output to remain activated until a code is entered
at the keypad.
7.1.1.1.6.2
Code Stops Timer
A menu option that allows the timer used on programmable outputs to be reset
by entering a valid user code.
7.1.1.1.6.3
Only if Closed
A menu option that activates an output after closing time and before opening
time. During these times, codes can be used to arm/disarm the system. A timer
is used to set these times.
7.1.1.1.6.4
Only if Open
A menu option that activates an output between opening time and closing time.
7.1.1.1.6.5
Inverted
A menu option that enables a mode that inverts the state of an output (normally
activated and then deactivated when an event occurs).
7.1.1.1.6.6
Log Event
A menu option that causes the selected output to log an event when it is
activated.
7.1.1.1.7
Schedules
A menu option that selects the schedules that affect the selected output.
