CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.16.10
16.1.1.1.2
Account Code
A menu option that specifies the unique code sent from the modem in the
control panel or dialler to the selected phone number. This code is used to
identify and charge the user. Separate account codes can be set up for each
phone number and each partition. This is also known as the account number.
16.1.1.1.3
Protocol
A menu option that configures the communicator format used to report to the
selected phone number.
Consult the instructions for your central station receiver to determine which
format is compatible.
16.1.1.1.4
Backup Control
A menu entry that groups options that set the backup sequence of the ISDN
telephone numbers.
16.1.1.1.4.1
Dial Attempts
A menu option that specifies the number of dial attempts that the module
makes to the central station before attempting an alternative destination.
16.1.1.1.4.2
Dial Sequence
A menu option that specifies the order in which the configured phone numbers
are dialled.
16.1.1.1.5
Events
A menu entry that contains all configurable events for each phone number.
16.1.1.1.5.1
Arm/Disarm/Alarm
A menu entry that groups the events that are reported to the selected phone
number.
16.1.1.1.5.1.1
Alarms
A menu option that sends a report to the selected phone number when an
alarm occurs.
16.1.1.1.5.1.2
Alarm Restores
A menu option that sends a report to the selected phone number when the
alarm has been restored after an alarm.
16.1.1.1.5.1.3
Opening/Closings
A menu option that sends a report to the selected phone number stating when
the system is opened (disarmed) and closed (armed).
16.1.1.1.5.1.4
Zone Bypass and Restores
A menu option that sends a report to the selected phone number when a zone
is bypassed. A report is also sent when the zone is restored (un-bypassed).
16.1.1.1.5.2
Tamper/Trouble
A menu entry that groups the tamper and trouble events that are reported to
the selected phone number.
16.1.1.1.5.2.1
Tampers and Restores
A menu option that sends a report to the selected phone number when a
tamper occurs. A report is also sent when the tamper is no longer active.
16.1.1.1.5.2.2
Zone Trouble and Restores
A menu option that sends a report to the selected phone number when a zone
trouble condition occurs. A report is also sent when the trouble condition is no
longer active.
16.1.1.1.5.2.3
Expander Trouble and Restores
A menu option that sends an expander trouble and restore report to the
selected phone number.
16.1.1.1.5.2.4
Siren/Phone Faults and Restores
A menu option that sends a report to the selected phone number when a siren
or phone fault occurs. A restore report is sent when the fault is fixed.
16.1.1.1.5.2.5
RF Sensor Lost and Restores
A menu option that sends a report to the selected phone number when an RF
sensor is missing. A restore report is sent to the central station when the
receiver receives a valid signal from the lost transmitter.
16.1.1.1.5.2.6
RF Low Battery and Restores
A menu option that sends a report to the selected phone number when a low
battery condition occurs in an RF sensor. A restore report is also sent when the
low battery condition is no longer active.
16.1.1.1.5.3
Power
A menu entry that groups the power events that are reported to the selected
phone number.
16.1.1.1.5.3.1
Power Trouble and Restores
A menu option that reports mains failure, mains restore, low battery and low
battery restore events to the selected phone number.
Location
Term
Definition
