CS875-575-375-275-175 Installers Manual with CS5500 keypad
B.13.11
13.3.1.5
Bit Error Rate
A menu option that displays the current Bit Error Rate (BER). The BER value is
periodically updated when the module is logged into the network. This
information is used for verification purposes only. BER values range from 0%
to 7%, with 99 as unknown. It is applicable to GPRS only.
13.3.1.6
Connection Fault
A menu entry that groups connection fault options. A connection fault occurs
when the module cannot log into the GSM network.
13.3.1.6.1
Line Fault RF Level
A menu option that configures the acceptable level of the RSSI signal. If the
signal falls below this level for the amount of time set in Line Fault Delay, a line
fault is generated. This can be from 1 to 31. If set to 0, the setting is disabled.
13.3.1.6.2
Line Fault Delay
A menu option that configures the length of time the RSSI signal must be
below the Line Fault RF Level before a line fault is generated. This can be from
0 to 255 seconds.
13.3.1.7
GSM Engine Info
A menu entry that groups information returned from the on-board GSM module
on the GSM module.
13.3.1.7.1
Manufacturer
A menu option that contains the GSM Engine Manufacturer Identification.
13.3.1.7.2
Type
A menu option that displays the type of GSM modem used by the module.
13.3.1.7.3
Software Revision
A menu option that displays the current software version of the selected
module.
13.3.1.7.4
Serial Number
A menu entry displays the serial number of the GSM modem used by the
module. It is used for diagnostics only.
13.3.2
CSD
Circuit Switched Data. This communication is used to upload/download data. It
is similar to a modem but it is wireless and built in to the CS7002.
13.3.2.1
Speed
A menu option that configures the baud rate for CSD/ GSM download. This
setting must match the baud rate set on the PC modem.
13.3.2.2
Use V1.110
A menu option that enables V1.110 for site-initiated CSD GSM calls. Enable
this option if the PC is on an ISDN line and is using an ISDN modem.
13.3.2.3
Mode
A menu option that configures the mode used for site initiated CSD GSM calls.
If you are experiencing problems with upload/download, change this setting
from transparent mode to non-transparent mode or vice versa.
13.3.3
Network
A menu entry that groups network options.
13.3.3.1
DHCP Assigned IP Address
A menu option that displays the IP address that is assigned to the CS7002
when it logs into the GPRS network.
13.3.3.2
PPP User ID
A menu option that configures the user ID for a PAP login. Contact the network
provider to confirm if a PAP login is required and to obtain the user ID and
password.
13.3.3.3
PPP Password
A menu option that configures the password for a PAP login. Contact the
network provider to confirm if a PAP login is required and to obtain the user ID
and password.
13.3.3.4
GPRS APN
A menu option that configures the GPRS access point name. Contact the
network provider to obtain this name. This is a mandatory setting if using TCP/
IP reporting.
13.3.3.5
GPRS APN 2
A CS7002 GPRS Module menu option that configures a second GPRS access
point name. Contact the network provider to obtain this name. This is used if
the connection cannot be made via GPRS APN.
13.3.3.6
Port Numbers
A menu entry that groups TCP/IP port options.
Location
Term
Definition
