G-Technology G-RACK 12, User Manual, Page: 98 / 296

Administrative Tool
p. 98
Targets
Under configured iSCSI targets you can see all existing targets on the server and their corresponding
status.
Click the Add button to create a new iSCSI target. Also you can configure CHAP Authentication for
this iSCSI Target
The following table describes the labels on the screen:
Name The name of target.
User name optional attribute containing user name for
incoming user name. goes to the iSCSI target
and the LUN that is automatically created. CHAP
secret
Password optional attribute containing user password for
incoming user name. Password must be at least
12 characters
QueuedCommands defines maximum number of commands qu-
eued to any session of this target. Default is 32
commands.
IntialR2T Turns on the default use of R2T; if disabled,
allows an initiator to start sending data to a tar-
get as if it had received an initial R2T. The result
function is OR
ImmediateData Configure using of unsolicited data. The result
function is AND.
HeaderDigest *
DataDigest *