G-Technology G-RACK 12, User Manual, Page: 89 / 296

Administrative Tool
p. 89
FXP Enable FXP protoco. FXP allows transfers be-
tween two remote FTP servers without any file
data going to the client asking for the transfer.
Note:
In order to use FXP (File Exchange Proto-
col) for server-to-server data transfer, make sure
to change the port from 21 to some other port.
Also, make sure to open the corresponding port
on your router and forward that port from your
router to the device.
Resume Allow clients to resume interrupted uploads and
downloads
Ident protocol Enable the ident protocol (RFC1413) . When a
client initially connects to the server the ident
protocol is used to attempt to identify the remo-
te username.
Reverse DNS lookup Enable reverse DNS lookup. Enable reverse
DNS lookup performed on the remote host’s IP
address for incoming active mode data connec-
tions and outgoing passive mode data connec-
tions.
Transfer log Enable transfer log