G-Technology G-RACK 12, User Manual

Page: 148 / 296

Hardware Description
p. 148
2. After the system has completely shut-down, carefully grasp the head of the power cord and
gently pull it out of the back of the power supply. Remove the cords from both power supply
modules.
3. Disconnect the cord from the power strip or wall outlet.
Removing the Chassis Cover
Removing the Chassis Cover
1. Power down the server as described in section 4-1, lay the chassis on a flat stable surface and
remove the chassis cover.
2. Remove the two screws from the sides of the chassis cover.
3. Press the release tabs to remove the cover from the locked position. Press both tabs at the same
time.
4. Once the top cover is released from the locked position, slide the cover toward the rear of the
chassis.
5. Lift the cover off the chassis.
Caution:
Except for short periods of time, do not operate the system without the cover in place. The
chassis cover must be in place to allow proper airflow and prevent overheating.