G-Technology G-RACK 12, User Manual

Page: 91 / 296

Administrative Tool
p. 91
Enable Toggle the button to enable RSync
Type Choose the type: Local - synchronizes two
local directories Remote - synchronizes a local
directory to a remote one. Obtain SSH access
to perform this. The remote system is to have
synchronizing enabled
Mode This option will be available if “remote” type
has been chosen. Is specifies the synchronizing
direction. Push - pushes the directory from the
local system to a remote system Pull - is used to
sync a remote directory to the local system.
Source shared folder The source shared folder to be synchronized
Destination shared folder The destination shared folder.
Trial run Perform a trial run with no changes made
Recursive Recurse into directories
Times Preserve modification times
Compress Compress file data during the transfer
Archive Enable archive mode
Delete Delete files on the receiving side that don’t exist
on sender
Quiet Suppress non-error messages
Preserve permissions Set the destination permissions to be the same
as the source permissions
Preserve ACLs Update the destination ACLs to be the same as
the source ACLs
Preserve extended attributes Update the destination extended attributes to
be the same as the local ones
Keep partially transferred files Enable this option to keep partially transferred
files, otherwise they will be deleted if the
transfer is interrupted.
Send email Send command output via email. An email mes-
sage with the command output (if any produ-
ced) is send to the administrator.