G-Technology G-RACK 12, User Manual

Page: 174 / 296

Use Cases/Tutorials
p. 174
1. Navigate to Connect > Rsync
2. Click the Add button to add a new job
3. Choose job type as Local
4. Select the Source workspace to Copy to a new destination
5. Select the Destination workspace
6. Choose settings you would like ( achieve, set time/data )
7. Create Job
This Job will now execute at the specified time or you can manually start the job.
How to setup a Remote RSync job
Remote RSync will require a module to be setup on the remote location. This Module will be the
source to push or pull from.
To setup a module on the G-RACK 12:
1. Navigate to Connect > Rsync
2. Click Server Tab
3. Toggle on the Enable switch
4. Click Modules Tab
5. Click + button
6. Choose the source workspace or create a new workspace
7. Choose settings you would like ( User authentication, read/write only, Host allow/deny)
8. Click Save
RSync module is now setup
How to setup a Push RSync job
To setup a remote RSync job to copy a local workspace to a remote location ( 2nd G-RACK 12 or a
different server or client computer )
1. Navigate to Connect > RSync
2. Click + icon to add a new job
3. Choose job type as remote
4. Choose mode as Push
5. Choose the source folder ( This folders data will be “Pushed” to the destination )
6. Enter the Destination
• Without user authentication
• Enter the destination IP follow by Module e.g 192.168.1.128::ModuleName
• With user authentication
• Enter the Username followed by destination and Module (e.g.
user@192.168.1.128::ModuleName)
• Add password in the password field