G-Technology G-RACK 12, User Manual

Page: 175 / 296

Use Cases/Tutorials
p. 175
7. Choose settings you would like ( archive, choose time/date )
8. Save job
This Job will now execute at the specified time or you can manually start the job.
How to setup a Pull RSync job
To setup a remote RSync job to copy a remote directory/folder on a different G-RACK 12, a module
must be setup, follow steps above to create Module on the remote G-RACK 12.
1. Navigate to Connect > RSync
2. Click + icon to add a new job
3. Choose job type as remote
4. Choose mode as Pull
5. Enter the Source server info
• Without user authentication
• Enter the destination IP follow by Module e.g 192.168.1.128::ModuleName
• With user authentication
• Enter the Username followed by destination and Module e.g
user@192.168.1.128::ModuleName
• Enter password in the Password field
6. Choose the local destination, select a workspace or create a new one
7. Choose settings you would like ( archive, choose time/date )
8. Save job
This Job will now execute at the specified time or you can manually start the job.
User Authentication for a module on the G-RACK 12
To set User Authentication on a module on the G-RACK 12:
1. Navigate to Connect > RSync
2. Click on Server, click on Module tab
3. Click + button or edit an existing module
4. Click on the Users tab
5. Add a new user and password
6. Click on General Tab
7. Toggle on User authentication
8. Click Save
To now use this module it will require user authentication
How to join your G-RACK 12 to Windows Active Directory corporate network.
Active Directory (AD) is a Windows OS directory service that facilitates working with interconnected,
complex and different network resources in a unified manner. The G-RACK 12 is able to participate in