G-Technology G-RACK 12, User Manual

Page: 208 / 296

Use Cases/Tutorials
p. 208
Steve@192.168.1.128::ModuleName
• Add password in the password field
• Choose settings you would like ( archive, choose time/date )
• Save job
This Job will now execute at the specified time or you can manually start the job.
Pull RSync Config
To setup a remote RSync job to copy a remote directory/folder on a different G-RACK 12, a module
must be setup, follow steps above to create Module on the remote G-RACK 12.
•
Navigate to Connect > RSync
• Click + icon to add a new job
• Choose job type as remote
• Choose mode as Pull
• Enter the Source server info
• Without user authentication
• Enter the destination IP follow by Module e.g 192.168.1.128::ModuleName
• With user authentication
• Enter the Username followed by destination and Module e.g
Steve@192.168.1.128::ModuleName
• Enter password in the Password field
• Choose the local destination, select a workspace or create a new oneChoose settings you would
like ( archive, choose time/date )
• Save job
This Job will now execute at the specified time or you can manually start the job.