Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 97 / 446

C122-E001-10EN 2-51
2.5 Partition Initialization
2.5.4 Configuring a partition
This section explains how to add and remove an SB, IO Unit, and IOX.
z
Adding an SB, IO Unit, and IOX (
→
2.5.4.1 )
z
Removing an SB, IO Unit, or IOX (
→
2.5.4.2 )
2.5.4.1 Adding an SB, IO Unit, and IOX
You can add an SB, IO Unit, and IOX to a partition.
Notes:
• Extended Mirror Mode cannot be set in partitions containing SBs, IO Units or
IOXs split with XPAR set. No split SB, IO Unit, or IOX can be assigned to a
partition that is set in Extended Mirror Mode.
•
No SB split with XPAR set can be assigned as the reserved SB of a partition that
is set in Extended Mirror Mode. Extended Mirror Mode cannot be set in
partitions to which split SBs are assigned as reserved SBs.
• XPAR is supported only in the PRIMEQUEST 500A/500 series, and the XPAR
option is required for setting XPAR.
Remarks: You can add an SB, IO Unit, or IOX to a partition even while the OS of the
partition is operating. In such cases, reboot the partition to validate the
changed configuration.
Procedure
1 Click [Partition]
→
[Partition Configuration].
The [Partition Configuration] window is displayed.