Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 90 / 446

2-44 C122-E001-10EN
CHAPTER 2 Setup
Adding an SBs, IO Units, and IOX into the
partition.
Set the Home IOU.
Set a reserved SB as needed.
• Add a free SB, IO Unit, and IOX.
• Release the reserved SB
(→
2.5.6
)
and add it.
• Remove the SB, IO Unit, and IOX from an existing partition
(→
2.5.4.2
)
and add them to the target partition.
Setting the partition name.
Setting various modes.
Shut down the target partition.
* Only if the partition is active.
Reboot the partition.
Split/merge SBs, IO Unit, and IOXs.
PRIMEQUEST 500A/500 series only