Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 249 / 446

C122-E001-10EN 4-63
4.4 PSA Installation (Linux: SUSE) (PRIMEQUEST 500A/500/400 series common)
3
Enter the ps command to check whether snmpd is active.
Command syntax:
Example: snmpd is active if /usr/sbin/snmpd is displayed.
4
If snmpd is active, enter the following command to stop snmpd.
Command syntax:
5
Change the value of oldEngineID defined in the /var/lib/net-snmp/snmpd.conf
file.
Remarks: You can change to any value in up to 34 hexadecimal digits, provided that it
is unique throughout the partitions in the same cabinet.
Example: To change the value of oldEngineID to 0x19760523
6 Enter the following command to start snmpd.
Command syntax:
7
Change the current directory to /opt/FJSVpsa/sh/ to regenerate the snmpv3
password used for the PSA internal communication.
Command syntax:
ps ax | grep snmpd
# ps ax | grep snmpd
32611 ? S 0:04 /usr/sbin/snmpd -Lsd -Lf /dev/null -p /var/run/
snmpd -a
/etc/init.d/snmpd stop
#vi /var/lib/net-snmp/snmpd.conf
oldEngineID 0x19760523
/etc/init.d/snmpd start
cd /opt/FJSVpsa/sh/