Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 312 / 446

4-126 C122-E001-10EN
CHAPTER 4 Work Required After Operating System Installation
Figure 4.53 [Startup and Recovery] dialog box
5
Do the following settings:
Select the type of memory dump file from [Write debugging information].
•
Kernel memory dump (recommended)
Only kernel memory is logged to the memory dump file.
In [Dump file], specify the full path of the directory to which a memory dump
file is saved. If the [Overwrite any existing file] check box is selected for
kernel memory dump, debug information is always written to the specified file.
• Small memory dump (64 KB or 128 KB)
Minimum information is logged in the memory dump file. In the [Small
Dump Directory] field, specify the full path of the directory used to store
small dumps. Every time an unrecoverable error occurs, a new file is created
in the directory specified in [Small dump directory].
6
Click [OK] to close the [Startup and Recovery] dialog box.
7 Click [OK] to exit from the [System Property] dialog box.