Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 106 / 446

2-60 C122-E001-10EN
CHAPTER 2 Setup
•
When estimating the length of time that operation may be stopped because of an
SB failure in a partition on which Windows Server 2003 is installed, consider the
time required for a restart. The actual time required for resuming operation is the
total of the time taken for system startup and the time taken for a reboot after the
switching to a reserved SB.
Procedure
1
Click [Partition]
→
[Reserved Configuration].
The [Reserved Configuration] window is displayed.
The check boxes are displayed vertically in an SB column that contains the free or
reserved SBs.
Remarks: For PRIMEQUEST 500 series, the contents of the [Reserved SB
Configuration] window vary with the MMB firmware version. If the
firmware version is 3.24 or later, the window in Figure 2.36 or Figure
2.39 is displayed. If the firmware version is earlier than 3.23, the
window in Figure 2.37 or Figure 2.40 is displayed. Confirm the
firmware version on the [Firmware Information] window (click
[System]
→
[Firmware Information].).
Figure 2.36 [Reserved SB Configuration] window (PRIMEQUEST 580A/540A and
PRIMEQUEST 580/540: This window is displayed for MMB firmware version 3.24 or
later)