Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 275 / 446

C122-E001-10EN 4-89
4.6 PSA Installation (Windows Server 2003) (PRIMEQUEST 520A/520/420)
1
Click [Control Panel] and [Network Connections].
A list of networks is displayed.
2
Select the network whose device name is the specified Team name and select
[Properties] from the right-click menu.
3 Select [Internet Protocol (TCP/IP)], click the [Properties] button, and specify the
IP address, subnet mask, default gateway, and other parameters in the [Internet
Protocol (TCP/IP) Properties] dialog box.
4.6.2 Setting the destination of trap sending from the partition
Note:
z
SNMP v.3 is not supported in Windows.
z
Perform the tasks for this setting only if the setting is required.
z
The setting is required for linkage with operation management software.
1 Click [Control Panel]
→
[Administrative Tools].
2 Click [Computer Management].
3
In the left tree, click [Services and Applications]
→
[Services].
4
In the right pane, click [SNMP Service].
The [SNMP Service] dialog box appears.
5 Click the [Trap] tab.
6
Enter the desired community name in the [Community Name] field, and click
[Add to List].
7
Click [Add] in the [Trap Send Destination] area.
8
Enter the host name or IP address of the server that will receive traps (for
notification), and click [Add].
9 Click [OK].
10
Click the [Action] menu
→
[Restart] to restart the SNMP service.