Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 294 / 446

4-108 C122-E001-10EN
CHAPTER 4 Work Required After Operating System Installation
RHEL-AS4 (IPF)
Configure the dump environment according to the following procedure:
z
Allocating a dump area
z
Initial setting for diskdump
RHEL5 (IPF)
z
Allocating a dump area
z
Initial setting for kdump
This section describes the dump-related tasks in order they are executed.
z
Allocating a dump area (
→
4.9.1 )
z
diskdump initial setting (
→
4.9.2 )
z
kdump initial setting (
→
4.9.3 )
Do these operations with the root privilege.
Note: Regarding the environment setting from X Window System or networks
such as telnet
Set up the dump environment at run level 3 wherever possible, without
using X Window System. If X Window System is used to set up the dump
environment, some console messages such as those related to a dump device
space shortage are not displayed on X Window System. Also when telnet or
ssh is used, some console messages may not be output. If circumstances
force you to use X Window System or telnet, use the dmesg command or /
var/log/messages to check the console messages.