Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 172 / 446

3-50 C122-E001-10EN
CHAPTER 3 Operating System Installation
•
Preparing a SCSI driver disk
1
Format a floppy disk.
2
Insert the Drivers CD into the drive of the separate PC.
3
Using Explorer, access the following folder on the Drivers CD:
E:\Drivers\SCSI\LSILogic (assuming that E is the CD-ROM drive)
4 Select all files in the folder, and copy them to the floppy disk.
•
Installation on a built-in SAS disk
Use the SAS driver stored on the "PRIMEQUEST Drivers CD for Microsoft
®
Windows Server
®
2003 (C122-E024) (referred to as the Drivers CD, in this
document).
Prepare a driver disk on a separate PC running Windows.
•
Preparing a SAS driver disk
1 Format a floppy disk.
2
Insert the Drivers CD into the drive of the separate PC.
3 Using Explorer, access the following folder on the Drivers CD:
E:\Drivers\SAS\LSILogic (assuming that E is the CD-ROM drive)
4 Select all files in the folder, and copy them to the floppy disk.
4
Click the [Apply] button.
The [EFI Boot Manager] message is displayed on the display connected to the
KVM.
Note: Confirm that the USB floppy disk drive is not installed.
If a floppy disk is inserted into a USB drive, the message shown
below may appear.
If so, press the [Enter] key to allow Windows to reboot, and
disconnect and reconnect the USB floppy disk drive once. Then,
resume this installation process from step 4.
EFI Boot Manager ver 1.xx [xx.xx]
Please Select a boot option
DVD /Acpi(xxxxxxxx)
Network Boot/Pci(1|0|0)/Mac(0007E9D80F36)
EFI Shell [Built in]
Boot option maintenance menu
INF file txtsetup is corrupt or missing,status 18.
Setup cannot continue. Press any key to exit.