Fujitsu PRIMEQUEST 400 Series, Installation Manual, Page: 79 / 446

C122-E001-10EN 2-33
2.2 MMB Connection and Setup
2
Enter the required items.
Table 2.13 Displayed and setting items in the [Date/Time] window
3 Click the [Apply] button.
Item Description
Date Specifies a date.
* No setting is required if an NTP server is used.
Time Sets hh:mm:ss (24-hour format). To set the time, select the
[Modify the Time] check box. Entry in the hh:mm:ss time field
is enabled only when the check box is selected.
Because the MMB time when this window is opened is
displayed, reloading is required to update the display.
When the automatic update is set, the time when the window is
updated is displayed.
* No setting is required if an NTP server is used.
Time zone Select a time zone from the pull-down menu.
NTP Sets [Enable]/[Disable] of the NTP function.
If the NTP function is set to [Enable], the MMB makes the NTP
server time synchronizations that are set in NTP Server1 to
NTP Server3 below.
The NTP function must also be set to [Enable] when other
clients such as partitions use the MMB as an NTP server.
Default: Disable
NTP Server1 Sets the IP address of the primary NTP server.
(Valid when the NTP function is [Enable].)
NTP Server2 Sets the IP address of the secondary NTP server.
(Valid when the NTP function is [Enable].)
NTP Server3 Sets the IP address of the thirdary NTP server.
(Valid when the NTP function is [Enable].)
The Latest Sync
Data/Time
Displays the last time the MMB was synchronized with the
specified NTP server.